Repair
Sage repair in Aarhus
We repair Sage espresso machines and bean-to-cup machines in our workshop in Tilst — from the Barista Express to the Oracle Touch.
Sage makes some of the most popular espresso machines on the Danish market, and we've repaired a good number of them in our workshop. Whether your machine is struggling with pressure, temperature or electronics, we can usually find and fix the problem.
Models we repair
- Sage Barista Express
- Sage Barista Express BES870UK
- Sage Barista Express Impress
- Sage Barista Pro
- Sage Barista Pro BES878
- Sage Barista Touch BES880
- Sage Barista Touch Impress SES881
- Sage Oracle Touch
- Sage The Oracle
- Sage The Oracle BES980 1st gen
Common faults on Sage machines
- Sage Barista Express — Low/incorrect brew pressure
- Sage Barista Express — Low pressure; weak water jet
- Sage Barista Express — Leaking around brew head
- Sage Barista Express — Poor/no flow
- Sage Barista Express — Pressure too high
- Sage Barista Express — Steam/hot-water routing problem
What should you bring?
- The machine itself, ideally with the water tank emptied
- The power cable
- A short description of the problem — feel free to email us beforehand
Real Sage repairs
See the full portfolio
Sage The Oracle BES980
Problem: Automatic tamping mechanism was out of calibration and the dual boiler was leaking internally.
Solution: Tamping motor and mechanism recalibrated. Boiler seals replaced. Full service overhaul.
Sage The Oracle Touch SES990 BSS
Problem: Touchscreen was unresponsive and the grinder stopped mid-grind — likely motor failure.
Solution: Touchscreen controller and grinder motor replaced. Full calibration of grinding and tamping.
Sage SES880 BSS Barista Touch
Problem: Touchscreen froze during milk steaming and the milk system produced cold foam.
Solution: Firmware updated, milk system cleaned and steam thermostat replaced. Includes new milk jug.
Sage BES875 BSS Barista Express
Problem: Grinder stopped grinding evenly and there was pressure drop during extraction — espresso ran too fast.
Solution: Conical burrs cleaned and adjusted. New seals in group head and portafilter. PID recalibrated.
Sage The Duo-Temp BES810 BSSUKM
Problem: Thermoblock was not heating to the correct temperature — espresso came out lukewarm.
Solution: Thermoblock descaled, new NTC temperature sensor fitted and PID regulation recalibrated.
Sage Oracle Jet
Problem: A blocked machine with restricted water flow.
Solution: The machine was taken in for diagnosis and cleaning of the water path.
Sage Barista Pro SES878
Problem: Leaks, missing water/steam, and on other units low pressure or stopping during brewing.
Solution: The steam arm, hoses, seals, solenoid and heater have been repaired or replaced depending on the fault.
Sage Bambino Plus
Problem: The pump ran, but no water passed through during extraction.
Solution: The water path and heater were diagnosed; on one repair case, the heater was identified as needing replacement.
Sage Barista Express Impress
Problem: Machines with blockages in the water path.
Solution: The water path and brew circuit were cleaned and flushed.
Sage Barista Touch Impress
Problem: The grinder dosed too much coffee and overloaded the tamping mechanism.
Solution: The grinder and dosing were reassembled, reset and diagnosed with focus on correct dose and tamping.
Nespresso / Sage Creatista Plus
Problem: Blocked water path, a faulty hose, and on other units issues with descaling/operation.
Solution: The water path and hoses were repaired/cleaned, and control/interface components were diagnosed on other units.
Sage Oracle Touch
See the case
Sage Barista Pro
See the case
Sage The Oracle BES980 BSS /I
See the caseIs your Sage machine broken?
Contact us today for a non-binding quote. Diagnostics cost 400 kr. and are deducted from the repair price if you go ahead.